Skip to content

Raspberry Pi

uFTP runs on every Raspberry Pi: it is small, it has no dependencies except OpenSSL for TLS, and it builds on the board in a few seconds.

sudo apt-get install git gcc make libssl-dev
git clone https://github.com/kingk85/uFTP.git
cd uFTP
make ENABLE_OPENSSL_SUPPORT="-D OPENSSL_ENABLED" LIBS="-lpthread -lssl -lcrypto"

Install it and the configuration:

sudo cp build/uFTP /sbin/uFTP
sudo cp uftpd.cfg /etc/uftpd.cfg
sudo nano /etc/uftpd.cfg
sudo chown root:root /sbin/uFTP /etc/uftpd.cfg
sudo chmod 600 /etc/uftpd.cfg

For FTPS create a certificate as described in TLS and certificates, then run:

sudo uFTP

On a small board lower the number of slots, because their memory is reserved at start:

MAXIMUM_ALLOWED_FTP_CONNECTION = 20

To start uFTP at boot, use the systemd unit in Installation.

The users of the configuration file can see a USB disk if you set HOME_n to its mount point, for example /media/usb.